FMS 50M

Compact - design scoop with easy-filling characteristics and good manoeuvrability. The conventional scoop for aggregate and sand. This fork mounted scoop is ideal for handling building materials. Ideal product to be used as a sand scoop or agrigate scoop.

	Model ref.	Capacity Cu. Mtr.	Min. Truck Cap. Kg	Max. Fork Size	Fork Spread mm	Bucket Width mm	Bucket Height mm	C of G	Weight Kg
	*FMS 20M	0.20	1250	150 X 60	910	800	505	560	209
	FMS 25M	0.25	1250	150 X 60	910	1000	505	580	216
	FMS 40M	0.40	1750	150 X 60	910	1000	608	600	262
	FMS 50M	0.50	1750	150 X 60	910	1250	608	620	319

* The scoops marked above can be supplied fully calibrated by ‘weights and measures’ with ‘crowding’ capability.

FMS 40H

Fork mounted, hydraulically operated, calibratable by Trading Standards Department. Requires auxiliary hydraulic valve on fork truck to operate.

Calibration costs extra.
Supplied without hydraulic hoses.

	Model ref.	Capacity Cu. Mtr.	Min. Truck Cap. Kg	Max. Fork Size	Fork Spread mm	Bucket Width mm	Bucket Height mm	C of G	Weight Kg
	FMS 20H	0.20	1500	150 X 60	894	800	505	500	200
	FMS 40H	0.40	2000	150 X 60	894	1000	660	580	253
	FMS 50H	0.50	2000	150 X 60	894	1250	608	660	310

HLS 40M

Ideal scoop for high and long reach where exact measurement of contents is not important. This fork mounted bucket is ideal for picking up overspill or dross in a processing area.

	Model ref.	Capacity Cu. Mtr.	Min. Truck Cap. Kg	Max. Fork Size	Fork Spread mm	Bucket Width mm	Bucket Height mm	C of G	Weight Kg
	HLS 20M	0.20	1500	125 X 45	886	800	367	600	165
	HLS 25M	0.25	1500	125 X 45	886	1000	367	600	180
	HLS 40M	0.40	2000	125 X 45	886	1250	392	620	195
	HLS 50M	0.50	2000	125 X 45	886	1500	392	620	205
	HLS 60M	0.60	2200	125 X 45	886	1780	392	620	233
	HLS 75M	0.75	3000	125 X 45	886	1500	592	620	270
	HLS 100M	1.00	3500	125 X 45	886	2000	592	900	440

MSC 40M

Ideal tipping bucket for loading small vans and charging hoppers. Long reach allows discharge of materials into centre of lorry, whilst small tipping arc allows discharge where headroom is confined.

	Model ref.	Capacity Cu. Mtr.	Min. Truck Cap. Kg	Max. Fork Size	Fork Spread mm	Bucket Width mm	Bucket Height mm
	MSC 20M	0.20	1500	125 X 50	886	800	505
	MSC 40M	0.40	3000	125 X 50	886	1000	608
	MSC 50M	0.50	3000	125 X 50	886	1250	608

MSC 40MC

All the characteristics of the standard multiscoop but with the additional benefit of being calibrated and stamped by Trading Standards Department. Ideal for point of sale measurement and loading of loose material.

	Model ref.	Capacity Cu. Mtr.	Min. Truck Cap. Kg	Max. Fork Size	Fork Spread mm	Bucket Width mm	Bucket Height mm
	MSC 20MC	0.20	1500	125 X 50	886	800	505
	MSC 40MC	0.40	3000	125 X 50	886	1000	608

MSC 40M

Ideal for loading of small vans or discharging loads into the centre of a lorry with the added advantage of being hydraulically operated. May be calibrated.

Calibration at extra cost.
Supplied without hydraulic hoses.

	Model ref.	Capacity Cu. Mtr.	Min. Truck Cap. Kg	Max. Fork Size	Fork Spread mm	Bucket Width mm	Bucket Height mm	C of G Min	C of G Max
	MSC 20H	0.20	2000	125 X 50	886	800	505	750	1080
	MSC 40H	0.40	3000	125 X 50	886	1000	608	790	1120
	MSC 50H	0.50	3000	125 X 50	886	1250	608	820	1150

CMS 50H

Hydraulically operated bucket with infinitely controllable discharge rate. Calibratable design with low service requirement.

	Model ref.	ITA Carriage	Min. Truck Cap. Kg	Capacity Cu. Metre	Bucket Width mm	Bucket Height mm
	CMS 20H	To suit truck class II or III state when ordering	1500	0.20	800	505
	CMS 40H		2000	0.40	1000	608
	CMS 50H		2000	0.50	1250	608
	CMS 100H		2500	1.00	1500	850