RFS 120L-L

The standard range of tipping skips but with a full lid fitted to prevent rubbish blowing about and to reduce odours. The front of the skip lid folds back over the fixed rear portion.

	Model Ref	Capacity M3	Capacity Kg
	RFS 25L-L	0.25	1000
	RFS 40L-L	0.4	1000
	RFS 80L-L	0.8	1000
	RFS 120L-L	1.2	1250
	RFS160L-L	1.6	1500

RFS 25L-OR-C

The standard range of tipping skips but manufactured with outriggers to allow castors to be fitted while only increasing the overall height of the skip by 20mm. Ideal for use with benches and chutes where height restriction can be an issue.

Standard Castors fitted are nylon 100mm diameter wheels, 2 fixed and 2 swivel.

	Model Ref	Capacity M3	Capacity Kg	Weight Kg
	RFS 25L-OR-C	0.25	1000	135
	RFS 40L-OR-C	0.4	1000	150
	RFS 80L-OR-C	0.8	1000	190
	RFS 120L-OR-C	1.2	1250	225
	RFS160L-OR-C	1.6	1500	250

RFS 40L-AU

The standard range of tipping skip but manufactured by adding a nudge bar at the front of the skip that will activate the standard release handle to empty the contents.

The design can be activated from the cab, allowing the contents to be discharged without the driver leaving his seat. The skip can still be activated manually.

	Model Ref	Capacity M3	Capacity Kg	Fork Spread	Weight Kg
	RFS 25L-AU	0.25	1000	890	125
	RFS 40L-AU	0.4	1000	890	140
	RFS 80L-AU	0.8	1000	890	180
	RFS 120L-AU	1.2	1250	890	215
	RFS 160L-AU	1.6	1250	890	240

RFS 120LP

Manufactured by adding 500mm mesh height extensions on three sides to give higher volume and added rigidity without a significant increase in the weight. Ideal for handling rubbish of high volume, low weight material, such as paper, packaging materials etc. These tipping containers are ideal for recycling areas where paper and card need to be kept seperate.

	Model Ref	Capacity M3	Capacity Kg	Overall Height	Weight Kg
	RFS 40LP	0.7	1000	1281	140
	RFS 80LP	1.4	1000	1334	180
	RFS 120LP	1.9	1250	1485	221
	RFS 160LP	2.5	1500	1485	246

RMS 120

This Rubble Skip is designed specifically for the rigours of the plant hire and construction market. Heavy construction, with reinforced edges, 5mm thick body, extra strong base frame and lock assembly.

	Model Ref	Capacity M3	Capacity Kg	Weight Kg
	RMS 120	1.2	1500	290

RFS 120L-FS

The standard range of tipping skip but manufactured by adding a mesh panel toward the rear of the skip producing a 300mm gap. Supplied with a drain tap and fully welded, this skip is ideal for draining of wet material, such as potato peelings. The panel can be cleaned in position or removed.

	Model Ref	Capacity M3	Capacity Kg	Unfiltered Capacity	Weight Kg
	RFS 25L-FS	0.25	1000	0.16m2	127
	RFS 40L-FS	0.4	1000	0.3m2	142
	RFS 80L-FS	0.8	1000	0.58m2	185
	RFS 120L-FS	1.2	1250	0.92m2	225
	RFS 160L-FS	1.6	1250	1.2m2	250

RFS 120L-FS

This fully stainless steel skip is designed for use primarily in the food and drinks industry, where corrosion resistance and the immunisation of contamination is vital. Every part is manufactured froma food grade stainless steel, making it suitable for pressure washing or steam cleaning. A must for disposal of waste in clean evironments.

	Model Ref	Capacity M3	Capacity Kg	Weight Kg
	RFS 25L-FS	0.25	1000	100
	RFS 40L-FS	0.40	1000	110
	RFS 80L-FS	0.80	1000	145
	RFS 120L-FS	1.20	1250	170
	RFS 160L-FS	1.60	1250	180
	RFS 200L-SS	2.00	1500	225

For detailed information on our products please refer to our Product Data Sheets

RFS 120L-SB

The regular range of Roll Forward Skips with steel underframe, but fitted with a body manufactured from stainless steel. Its corrosion resistance makes it ideal for handling wet or corrosive products or for use in a harsh environment.

	Model Ref	Capacity M3	Capacity Kg	Weight Kg
	RFS 25L-SB	0.25	1000	100
	RFS 40L-SB	0.40	1000	110
	RFS 80L-SB	0.80	1000	145
	RFS 120L-SB	1.20	1250	170
	RFS 160L-SB	1.60	1500	180
	RFS 200L-SB	2.00	1500	225

TRFS 80L

Similar to the standard range of skips, this tapered body skip has been designed to ease the release of sticky process waste when emptied. Overall dimensions are the same as the standard skips except the bottom of the skip tapers in by 250mm both sides.

	Model Ref	Capacity M3	Capacity Kg	Fork Spread	Weight Kg
	TRFS 25L	0.18	1000	890	105
	TRFS 40L	0.25	1000	890	115
	TRFS 80L	0.6	1000	890	150
	TRFS 120L	0.9	1250	890	175
	TRFS 160L	1.2	1250	890	185