Jibs

Low Liner Jib

LLJ 500-2.7

An inexpensive jib which gives longer reach capabilities for picking up a product which is difficult to palletise or for handling motors, press tools etc. from positions which are hard to access. Supplied c/w hook and shackle which can be moved to any suitable lifting position.

See selection chart for lift capacity of jibs.

Model Ref	Truck Capacity kg	Max Fork Size mm	Fork Spread mm	Wgt. Kg	Centre of gravity
LLJ 500-0.8	1000	125 x 50	365	90	692
LLJ 500-0.8-BP	1000	180 x 90	462	110	670
LLJ 500-1.0	1300	125 x 50	365	90	692
LLJ 500-1.0-BP	1300	180 x 90	462	110	670
LLJ 500-1.3	1500	125 x 50	365	91	692
LLJ 500-1.3-BP	1500	180 x 90	462	110	670
LLJ 500-1.8	2000	125 x 50	365	92	692
LLJ 500-1.8-BP	2000	180 x 90	462	112	670
LLJ 500-2.2	2500	125 x 50	440	119	733
LLJ 500-2.2-BP	2500	180 x 90	462	112	670
LLJ 500-2.7	3000	150 x 50	440	120	733
LLJ 500-2.7-BP	3000	180 x 90	462	130	690
LLJ 500-3.1	3500	150 x 50	440	124	733
LLJ 500-3.1-BP	3500	180 x 90	482	130	690
LLJ 500-3.5	4000	150 x 50	440	129	733
LLJ 500-3.5-BP	4000	180 x 90	482	130	690
LLJ 500-4.4	5000	150 x 50	510	175	840
LLJ 500-4.4-BP	5000	180 x 90	556	180	760

Fork Mounted Jib

FMJ 500-2.2

A fixed length crane jib which mounts onto the forks of any truck. The ideal attachment for lifting and conveying loads which are not suitable for, or do not require, palletising. Supplied c/w hook and shackle which can be moved to any suitable lifting position.

See selection chart for lift capacity.

Model Ref	Truck Capacity kg	Max Fork Size mm	Fork Spread mm	Wgt. Kg	Centre of gravity
FMJ 500-0.8	1000	125 x 50	496	152	718
FMJ 500-1.0	1300	125 X 50	496	152	718
FMJ 500-1.3	1500	125 x 50	496	154	718
FMJ 500-1.8	2000	125 X 50	496	158	658
FMJ 500-2.2	2500	125 x 50	496	159	658
FMJ 500-2.7	3000	150 x 50	546	165	660
FMJ 500-3.1	3500	150 x 50	546	166	660
FMJ 500-3.5	4000	150 x 50	546	167	660
FMJ 500-4.4	5000	150 x 50	546	172	653

Cross Beam Jib

Jib position

Beam position

This product gives dual functions of supporting a load along the truck length like a standard jib or lifting a load at right angles to the truck like a spreader beam. Allows wide/long loads to be transported safely. The attachment is fork mounted and secured to the truck using a chain that is wrapped around the carriage. Supplied c/w two hooks and shackles.

When in the beam position it spans 2000mm. The minimum load
centre will be 250mm. Capacity in this position is 2000Kg.When in the
jib position it reaches 2000mm. The Capacity in this position is 500Kg.
See page 36 for JIB chart and ordering info.

See selection chart for lift capacity.

Model Ref	Load Centre Jib Position	Capacity Jib Position	Load Centre Beam Position	Capacity Beam Position	Weight Kg
CBJ 250-2000	2000mm	500 Kg	250mm	2000 Kg	125

Tele-liner Jib

LLX 500-2.2

All the benefits of the ‘lowliner jib’ but with the added feature of a mechanically extending inner section for extra reach. Supplied with two hooks which allow extra long loads to be carried in complete safety.

See selection chart for carrying capacity at each load centre.

CLOSED LENGTH 2000mm
EXTENDED LENGTH 3000mm

Model Ref	Truck Capacity Kg	Max Fork Size mm	Fork Spread mm	Wgt. Kg	Centre of gravity min	Centre of gravity max
LLX 500-1.8	2000	125 x 50	385	124	763	960
LLX 500-1.8-BP	2000	180 x 90	482	140	735	900
LLX 500-2.2	2500	125 x 50	385	124	763	960
LLX 500-2.2-BP	2500	180 x 90	482	140	735	900
LLX 500-2.7	3000	125 x 50	520	220	795	985
LLX 500-2.7-BP	3000	180 x 90	556	240	735	930
LLX 500-3.1	3500	125 x 50	520	220	795	985
LLX 500-3.1-BP	3500	180 x 90	556	240	755	930
LLX 500-3.5	4000	125 x 50	520	222	795	985
LLX 500-3.5-BP	4000	180 x 90	556	245	760	935
LLX 500-4.4	5000	150 x 50	530	234	821	995
LLX 500-4.4-BP	5000	180 x 90	556	245	760	935

Extender Jib

FMX 500-2.1

Allows transport of long loads. The two hooks provided allow loads to be slung at greater centres than with conventional fixed jibs. The greater length available allows loads to be picked up from otherwise inaccessible areas. Supplied complete with two swivel hooks. Manual extension. Jibs offer a cost effective alternative to cranes.

CLOSED LENGTH 2000mm
EXTENDED LENGTH 3000mm

See selection chart for lift capacity.

Model Ref	Truck Capacity Kg	Max Fork Size mm	Fork Spread mm	Wgt. Kg	Centre of gravity min	Centre of gravity max
FMX500 1.8	2000	125 x 50	496	133	716	899
FMX500 2.2	2500	125 x 50	496	135	716	899
FMX500 2.7	3000	150 x 50	546	220	730	915
FMX500 3.1	3500	150 x 50	546	220	730	915
FMX500 3.5	4000	150 x 50	546	222	735	920
FMX500 4.4	5000	150 x 50	546	226	762	952

Extender Jib - Short Reach

SRX 500-2.2

All the benefits of our ‘standard’ Extender Jib but the shorter closed length makes it an ideal choice for manoeuvring in the occasional confined space.

See selection chart capacity at various lifting points..

Model Ref	Truck Capacity Kg	Max Fork Size mm	Fork Spread mm	Wgt. Kg	Length mm
SRX 500-1.8	2000	125 x 50	496	105	1250 Closed 1750 Extended
SRX 500-2.2	2500	125 x 50	496	105
SRX 500-2.7	3000	150 x 50	546	165
SRX 500-3.1	3500	150 x 50	546	165
SRX 500-3.5	4000	150 x 50	546	167

Hydraulic Telescopic Jib

FMX 500-2.2H

Hydraulically operated. Can be extended ready for lift without driver leaving the seat. Fork mounted for quick fitting. Supplied with two hooks. Other closed and extended lengths are available on request.

See selection chart for lift capacity.

Model Ref	Truck Capacity Kg	Max Fork Size mm	Fork Spread mm	Wgt. Kg	Length
FMX 500-1.8H	2000	125 x 50	496	160	2000 Closed 3000 Extended
FMX 500-2.2H	2500	125 x 50	496	162
FMX 500-2.7H	3000	150 x 50	546	247
FMX 500-3.1H	3500	150 x 50	546	247
FMX 500-3.5H	4000	150 x 50	546	249

Maxi Lift Jib

FML 500-6.5

A jib designed for a heavier range of forktruck for handling large unpalletised loads. Bar-locked behind the fork heels for safety.

See selection chart for lift capacity.

Model Ref	Truck Capacity Kg	Max Fork Size mm	Fork Spread mm	Wgt. Kg	Centre of Gravity	Length mm
FML600-5.5	6000	150 x 65	650	445	810	2000
FML600-6.5	7000	150 x 65	650	445	810	2000
FML600-7.4	8000	150 x 70	650	540	980	2500
FML600-9.2	10000	200 x 75	800	585	960	2500

Articulating Extender Jib

FMXA 500-2.2

Designed to handle loads at variable heights, this extending jib comes complete with two hooks and can be adjusted to 45 degrees at 15 degree increments.

CLOSED - 2500mm
EXTENDED - 3000mm

See selection chart for lift capacity.

Model Ref	Truck Capacity Kg	Max Fork Size mm	Fork Spread mm	Wgt. Kg	Centre of Gravity min	Centre of Gravity max
FMXA 500-2.2	2500	125 x 50	496	282	710	790
FMXA 500-2.7	3000	150 x 50	546	330	800	880
FMXA 500-3.1	3500	150 x 50	546	332	800	880
FMXA 500-3.5	4000	150 x 50	546	332	800	880

Easi Reach Jib

ERJ 500-4.4

Standard jib for mounting direct onto the truck carriage. This crane attachment is supplied c/w hook and shackle. Revised beam profile allows access in confined spaces.

Quick release bottom hangers also available.
Jibs for bar-mounted and DIN (square plate carriages) are also available.

See selection chart for lift capacity.

Model Ref	Truck Capacity Kg	Carriage Class	Wgt. Kg	Centre of Gravity
ERJ 500-0.8	1000	II	98	560
ERJ 500-1.0	1300	II	98	560
ERJ 500-1.3	1500	II	99	560
ERJ 500-1.8	2000	II	99	560
ERJ 500-2.2	2500	II	99	560
ERJ 500-2.7	3000	III	169	620
ERJ 500-3.1	3500	III	169	620
ERJ 500-3.5	4000	III	170	620
ERJ 500-4.4	5000	IV	172	620
ERJ 600-5.0	5500	IV	201	623
ERJ 600-5.5	6000	IV	201	623
ERJ 600-6.5	7000	IV	254	623
ERJ 600-7.4	8000	IV	254	623

Carriage Mounted Jibs

CMX 500-2.2

A manually extending jib which mounts your fork lift truck. Allows the versatility of manoeuvrability of a shorter reach jib.

Quick Release Bottom Hangers also available.
Available for DIN (square plate carriages).

See selection chart for lift capacity.

Model Ref	Truck Capacity Kg	Carriage Class	Length	Wgt. Kg
CMX 500-1.8	1000	II	2000 RETRACTED 3000 EXTENDED	120
CMX 500-2.2	1300	II		121
CMX 500-2.7	1500	III		208
CMX 500-3.1	2000	III		210
CMX 500-3.5	2500	III		212
CMX 500-4.4	3000	III		215

Econo Jib

ECJ 500-1.8-1200lg

A single -hook-position low cost jib generally tailor-made to suit handling of a specific product. Ideal for tasks such as engine removal, tool changing etc.

See selection chart for lift capacity.

Model Ref	Truck Capacity Kg	Carriage Class
ECJ 500-0.8	1000	II
ECJ 500-1.3	1500	II
ECJ 500-1.8	2000	II
ECJ 500-2.2	2500	II
ECJ 500-2.7	3000	III

High Lift Jib

HLJ 500-3.5g

Carriage mounted jib, where greater lift height is required. This swan neck jib is supplied complete with hook and shackle.

Quick release bottom hangers also available.
High lift jibs for bar-mounted and DIN (square plate) carriages also available.

See selection chart for lift capacity.

Model Ref	Truck Capacity Kg	Carriage Class	Height from Underside of Carriage to Hook	Centre of Gravity	Weight Kg
HLJ 500-1.3	1500	II	982	450	162
HLJ 500-1.8	2000	II	945	450	163
HLJ 500-2.2	2500	II	932	450	164
HLJ 500-2.7	3000	III	922	435	212
HLJ 500-3.1	3500	III	922	435	213
HLJ 500-3.5	4000	III	922	435	215
HLJ 500-4.4	5000	III	898	435	220

Carrimax Jib

HCJ 600-7.4

An extra heavy duty class IV carriage mounted jib. With increased lift height, and high swinging-load resistance this is the ideal choice for heavy machinery moving and for the hire market .

Standard length 1750mm

See selection chart for lift capacity.

Model Ref	Truck Capacity Kg	Carriage Class	Height from Underside of Carriage to Hook	Centre of Gravity	Weight Kg
HCJ 600-5.0	5500	IV	898	495	188
HCJ 600-5.5	6000	IV	1185	386	365
HCJ 600-6.0	6500	IV	1185	386	365
HCJ 600-6.5	7000	IV	1185	345	405
HCJ 600-7.4	8000	IV	1185	342	409

Carriage Mounted Hydraulic Telescopic Jib

CMX 500-2.7H

Operated by means of a hydraulic cylinder this infinitely adjustable jib allows items to be lifted from inaccessible positions. Requires 1 double-acting hydraulic service on the fork truck. Supplied without hoses.

Model Ref	Truck Capacity Kg	Carriage Class	Length	Weight Kg
CMX 500-1.8H	2000	II	1250mm RETRACTED 2000mm EXTENDED	125
CMX 500-2.2H	2500	II		128
CMX 500-2.7H	3000	III		178
CMX 500-3.1H	3500	III		182
CMX 500-3.5H	4000	III		186

High Lift Hydraulic Telescopic Jib

HLX 500-2.7H

All the features of the standard model but with the benefit of extra lift capability.

Quick release button hangers also available.
Jibs for bar-mounted and DIN spec. carriage also available.

See selection chart.

Model Ref	Truck Capacity Kg	Carriage Class	Length	Weight Kg
HLX 500-1.8H	2000	II	1250mm RETRACTED 2000mm EXTENDED	227
HLX 500-2.2H	2500	II		242
HLX 500-2.7H	3000	III		262
HLX 500-3.1H	3500	III		267
HLX 500-3.5H	4000	III		267